We've Moved!

Please update your bookmarks from embeddedarm.com to embeddedts.com. You've already been redirected and may close this modal to continue.

TS-7553-V2-SMN21 with TS-SILO TS-7553-V2-SMN21 with TS-SILO
TS-7553-V2-SMN21 without TS-SILO TS-7553-V2-SMN21 without TS-SILO
TS-7553-V2 Rear View TS-7553-V2 Rear View
TS-7553-V2 Side View TS-7553-V2 Side View
TS-7553-V2 shown with NimbeLink and Antennas TS-7553-V2 shown with NimbeLink and Antennas
TS-7553-V2-SMW7I Angled View with XBee radio (sold separately) and TS-SILO TS-7553-V2-SMW7I Angled View with XBee radio (sold separately) and TS-SILO
TS-ENC820-HMI Open View with TS-7553-V2-SMN2I TS-ENC820-HMI Open View with TS-7553-V2-SMN2I
TS-ENC820-HMI Top View  with 128x64 Pixel LCD and 4 membrane switches TS-ENC820-HMI Top View with 128x64 Pixel LCD and 4 membrane switches
TS-ENC820-DIN/TS-ENC820-HMI-DIN Rear View with DIN mount TS-ENC820-DIN/TS-ENC820-HMI-DIN Rear View with DIN mount
TS-ENC820-HMI Angled View with HMI options TS-ENC820-HMI Angled View with HMI options
TS-ENC820-HMI Side View TS-ENC820-HMI Side View
TS-7553-V2-SMN21 with TS-SILO
TS-7553-V2-SMN21 without TS-SILO
TS-7553-V2 Rear View
TS-7553-V2 Side View
TS-7553-V2 shown with NimbeLink and Antennas
TS-7553-V2-SMW7I Angled View with XBee radio (sold separately) and TS-SILO
TS-ENC820-HMI Open View with TS-7553-V2-SMN2I
TS-ENC820-HMI Top View  with 128x64 Pixel LCD and 4 membrane switches
TS-ENC820-DIN/TS-ENC820-HMI-DIN Rear View with DIN mount
TS-ENC820-HMI Angled View with HMI options
TS-ENC820-HMI Side View

TS-7553-V2

IoT-Ready SBC with Reliable Storage, Cell Modem, XBee, PoE

Lifecycle: Fully Developed | Released: December 2017

Industrial embedded solution with data reliability enabled by TS-SILO power reserve and eMMC flash (SLC/MLC). IoT-ready with cellular modem and XBee radio.

  • Powered by NXP i.MX 6UltraLite with the Arm® Cortex®-A7 core operating up to 696 MHz
  • Connected with Ethernet, Wi-Fi, Bluetooth, XBee/NimbeLink, and USB radios
  • Robust TS-SILO Option Provides up to 30 Seconds of Hold up Power
  • Flexible Data Storage: FRAM, eMMC Flash, microSD
  • Extendable with Daughter card interface enabling cellular modem. PoE, or custom applications
$166 (Qty. 100) $218 (Qty. 1)
No minimum order quantity on standard products.

Low Power Industrial IoT Gateway 

The TS-7553-V2  is an extremely low power, high-performance single board computer powered by NXP i.MX 6UltraLite with an Arm® Cortex®-A7 core operating up to 696 MHz. This versatile embedded single board computer hits on all the main points for a low power, cost effective, Internet-of-Things (IoT) capable, and ready-to-deploy OEM board with an emphasis on data integrity.

The TS-7553-V2 offers the ability to communicate seamlessly with several different networks simultaneously from a single device. Using the onboard peripherals the system can connect to Ethernet, Wi-Fi, Bluetooth Low Energy (BLE5.0 compatible), USB, RS-232, RS-485, and CAN networks or devices. Built in module interfaces like the XBee/NimbeLink socket and internal USB ports allow expansion to other networks like Cellular, DigiMesh, ZigBee, Lora, and other proprietary or industry specific networks. This ability to communicate over a wide variety of wired and wireless interfaces puts the TS-7553-V2 in an excellent position to be an IoT node or gateway.

A Nine-Axis Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit containing a gyroscope, accelerometer and compass is an on-board option for asset management, fleet management, and other applications which would require sensing motion or vibration in the environment.

The TS-7553-V2 is also well suited for applications which require a simple HMI interface. With an off the shelf, low cost enclosure that can include a backlit monochrome 128x64 px LCD and four button keypad it is easy to create interactive menus for the user. An optional DIN mount makes it easy to mount to DIN rails for an fast off-the-shelf solution.

Applications with strict low power requirements will appreciate the work that's been done to reduce power consumption to less than 2 W in typical conditions and a 9 mW sleep mode. Power over Ethernet (PoE) is supported via a daughter card.

Robust and Rugged Engineering 

Each component on the TS-7553-V2 has been carefully chosen to ensure not only reliable operation in the field, but also to get maximum product lifespan for 10+ years. The fanless design of the TS-7553-V2 paired with the low cost enclosure is able to withstand high vibration, high debris, and a wide temperature range of -40 °C to 85 °C.


Reliable Data Storage with TS-SILO and FRAM 

The TS-SILO power reserve ensures that there will never be data loss or corruption when there is unexpected interruptions in power. TS-SILO provides another 30 seconds of operation to allow graceful system shutdown, protecting data stored on the on board eMMC or microSD card. The onboard MLC eMMC flash is configurable as pseudo SLC (pSLC) memory for further reliability. Additionally, the TS-7553-V2 integrates Ferroelectric RAM (FRAM or FeRAM ) which combines non-volatile data storage with incredibly high read/write endurance for the ultimate in reliability for heavy data logging applications.

Short Time to Market with Long Term Deployment 

Everything is preloaded to get your application up and running quickly. Debian Linux OS, utilities, and tools are preloaded to help you get the most out of the hardware features. The guaranteed 10+ year lifecycle ensures a long-term deployment in the field, free from expensive redesigns that commonly accompany "low-cost" competitor products with no guaranteed long-term availability.

The Next Generation of an Old Favorite 

The TS-7553-V2 is everything you loved about the TS-7553 and much more, kept at the original price point. The increased CPU performance, higher capacity memory, reliable eMMC flash, and inclusion of new features like Wi-Fi/Bluetooth LE, cell modem and TS-SILO, make the TS-7553-V2 a very attractive and complete solution for applications requiring low power computing. With a nearly identical physical footprint and high application code portability from the TS-7553, it's an easy replacement, so upgrading in the field is as seamless as possible.

Software

By default, command line Debian is loaded which provides a massive repository of prebuilt applications and services and Debian provides a long history of focus on stability and support.

Software features include:

  • U-Boot bootloader
  • Linux Kernel
  • Debian Jessie distribution support
  • Many programming languages supported (C, C++, Python, node.js, etc.)
  • Source code examples available
  • Buildroot

Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation. To assist customers heading down this path we have forked a stable snapshot of Buildroot and have added on top of it everything that is required for operation with one of our products. For more information, see the Buildroot Configuration section in the manual.


Please contact embeddedTS for further information regarding Operating System and software support for this product.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

embeddedTS provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, and our official documentation.

Documentation
Other
Software Download
Video
News Article
Block Diagram
Featured On
From the Blog:
Product Notices:
Subscribe to the Product Communication System (TS-PCS) for TS-7553-V2 Notices
CPU
Architecture Arm
Part Number i.MX 6UltraLite
Vendor NXP
CPU Speed 696 MHz
Floating Point Unit Yes
CPU Cores (Max) 1x
Core Specs
Base Memory Capacity 512 MB
Storage
Base Flash Capacity 4 GB
Flash Type eMMC
microSD Card Socket 1x
Other
Battery-Backed Real Time Clock 1x
General I/O
General-Purpose Input/Output (GPIO) Pins 5x
Relays 1x
Serial Interfaces
RS-232 Ports 3x
RS-485 Ports 1x
TTL-Level UART Ports 2x
SPI Ports 1x
I2C Ports 1x
Peripheral Interfaces
USB Host Ports 3x (1x External, 1x Internal, 1x XBee Socket)
USB Device Ports 1x (For Console)
Industrial Protocols
CAN Ports 2x
Precision Time Protocol (PTP) Yes (Available via kernel update in downloads)
Networking
10/100 Ethernet Ports 1x
Power-over-Ethernet Yes (via Daughter Card)
Physical
Operating Supply Voltage 5 VDC to 28 VDC
Minimum Power Consumption 0.70 W
Typical Power Consumption 1.00 W
Maximum Power Consumption 1.66 W
Fanless Temperature Range -40 °C to 85 °C
Radio Comms
Cellular Modem Yes
Bluetooth Yes
WiFi Radio / Wireless LAN Yes
XBee 1x
Solutions
TS-SILO Power Reserve (Super Capacitors) Yes
Software
Linux Kernel Version 5.10
Debian Linux Jessie (8.11)
Sensors
Accelerometer/Gyro Yes (Nine-Axis; Gyro + Accelerometer + Compass)
Graphics / HMI
Matrix Keypad Header 1x
Text LCD Header 1x
TS-7553-V2 Block Diagram
TS-7553-V2 Block Diagram Image

(Download PDF version)

Quantities
Product Configurations 1 10 25 50 100
TS-7553-V2-SMN2I $218 $191 $186 $176 $166
TS-7553-V2-SMW3I $245 $219 $212 $203 $192
TS-7553-V2-SMW5I $274 $247 $240 $232 $221
TS-7553-V2-SMW7I $298 $274 $266 $258 $247

Product Customization

embeddedTS can provide you with a custom tailored version of our standard product starting at minimum order sizes of 100 units or more. Customized products can be based on various combinations of many of the standard product features. There will be a one-time customization fee to cover the set up of your custom part number and production processes. Once the set up is complete the standard lead time for your customized product would be 6-8 weeks. Please contact us to get started on tailoring this product to meet your needs. In addition to tailoring our standard product to your needs, for slightly larger orders sizes, embeddedTS can also provide a custom design based on this product to meet your mechanical requirements or to add features.

In addition to tailoring features available in our standard product set, the following options are available:

Product Option Qty. 100 Price
8 GByte Industrial Temperature eMMC $13
16 GByte Industrial Temperature eMMC $31
32 GByte Industrial Temperature eMMC $53
64 GByte Industrial Temperature eMMC $80
TS-ENC820 Thumbnail
TS-ENC820
In Enclosures

Plastic Enclosure

More information
TS-ENC820-HMI Thumbnail
TS-ENC820-HMI
In Enclosures

Plastic enclosure with 128x64 pixel LCD and 4 membrane switches

More information
TS-DC767-MT Thumbnail
TS-DC767-MT
In Board Specific Peripherals

Daughter card for modem modules (modem not included)

More information
TS-DC767-POE Thumbnail
TS-DC767-POE
In Board Specific Peripherals

Daughter card with Power-over-Ethernet

More information

Product Configuration
Part Description Price
TS-7553-V2-SMN2I TS-7553-V2 SBC with the i.MX6UL 698MHz Arm Cortex-A7 core 512MB DDR3 RAM and 4GB eMMC flash, relay, NimbleLink/XBee socket, (-40C to 85C) Pricing
TS-7553-V2-SMW3I TS-7553-V2 SBC with the i.MX6UL 698MHz Arm Cortex-A7 core 512MB DDR3 RAM and 4GB eMMC flash, relay, NimbleLink/XBee socket, FRAM, LCD/keypad support, WiFi/Bluetooth, (-40C to 85C) Pricing
TS-7553-V2-SMW5I TS-7553-V2 SBC with the i.MX6UL 698MHz Arm Cortex-A7 core 512MB DDR3 RAM and 4GB eMMC flash, relay, NimbleLink/XBee socket, FRAM, TS-SILO, LCD/keypad support, WiFi/Bluetooth, (-40C to 85C) Pricing
TS-7553-V2-SMW7I TS-7553-V2 SBC with the i.MX6UL 698MHz Arm Cortex-A7 core 512MB DDR3 RAM and 4GB eMMC flash, relay, NimbleLink/XBee socket, FRAM, gyro, TS-SILO, LCD/keypad support, WiFi/Bluetooth (-40C to 85C) Pricing
Board Specific Peripherals
Part Description Price
TS-DC767-MT Daughter card for modem modules (modem not included) $37
TS-DC767-POE Daughter card with Power-over-Ethernet $62
Flash Media
Part Description Price
MSD-4GB-7553-V2 TS-7553-V2 bootable 4GB microSD card pre-loaded with Debian $15
MSD-4GB-BLANK SanDisk microSD card, Size 4GB $15
MSD-4GB-USB-7553-V2 TS-7553-V2 bootable 4GB microSD card pre-loaded with Debian, includes USB reader $48
Accessories and Extras
Part Description Price
CB-JUMPER-10-F-F-6 Quantity 10 female-to-female 6-inch red jumper wires for use with 0.1” headers $7
RC-DB9 10-pin header COM port adapter cable to DB-9 $5
CB-USB-AMAF USB Cable w/ connectors USB-A Male to USB-A Female $9
CB-USB-AMBM USB Cable w/ connectors USB-A Male to USB-B Male $9
CB-DB9-Y DB-9 Y Cable $10
Power Supplies
Part Description Price
PS-5VDC-REG-2_5AMP-BC Regulated 5 VDC, 2.5 A wall mounted power supply with 5.5mm barrel connector (100-240 VAC, 50-60 Hz, A-type Plug) $24
DIN Enclosures
Part Description Price
TS-ENC820-DIN Plastic Enclosure with DIN Mount Hardware $38
TS-ENC820-HMI-DIN Plastic Enclosure with 128x64 Pixel LCD and 4 Membrane Switches and DIN Mount Hardware $72
Enclosures
Part Description Price
TS-ENC820 Plastic Enclosure $23
TS-ENC820-HMI Plastic enclosure with 128x64 pixel LCD and 4 membrane switches $56
Development Kits
Part Description Price
KIT-7553-V2-DIN Development kit including suggested parts and DIN-mountable enclosure for new development Includes packaged parts:
  • PS-5VDC-REG-2_5AMP-BC: Regulated 5 VDC, 2.5 A wall mounted power supply with 5.5mm barrel connector (100-240 VAC, 50-60 Hz, A-type Plug)
  • TS-ENC820-DIN: Plastic Enclosure with DIN Mount Hardware
  • MSD-4GB-USB-7553-V2: TS-7553-V2 bootable 4GB microSD card pre-loaded with Debian, includes USB reader
  • CB-USB-AMAF: USB Cable w/ connectors USB-A Male to USB-A Female
  • CB-USB-AMBM: USB Cable w/ connectors USB-A Male to USB-B Male
  • CB-DB9-Y: DB-9 Y Cable
  • RC-DB9: 10-pin header COM port adapter cable to DB-9
$127
KIT-7553-V2-HMI-DIN Development kit including suggested parts and DIN-mountable enclosure with LCD and buttons for new development Includes packaged parts:
  • PS-5VDC-REG-2_5AMP-BC: Regulated 5 VDC, 2.5 A wall mounted power supply with 5.5mm barrel connector (100-240 VAC, 50-60 Hz, A-type Plug)
  • TS-ENC820-HMI-DIN: Plastic Enclosure with 128x64 Pixel LCD and 4 Membrane Switches and DIN Mount Hardware
  • MSD-4GB-USB-7553-V2: TS-7553-V2 bootable 4GB microSD card pre-loaded with Debian, includes USB reader
  • CB-USB-AMAF: USB Cable w/ connectors USB-A Male to USB-A Female
  • CB-USB-AMBM: USB Cable w/ connectors USB-A Male to USB-B Male
  • CB-DB9-Y: DB-9 Y Cable
  • RC-DB9: 10-pin header COM port adapter cable to DB-9
$174

CA Prop 65 Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

TS-7553-V2-SMN2I TS-7553-V2-SMW3I TS-7553-V2-SMW5I TS-7553-V2-SMW7I
CPU Arch NXP i.MX6UL Arm Cortex A7
CPU Cores 1
CPU Speed 698 MHz
RAM 512 MByte
Onboard Storage 4 GByte MLC eMMC Flash
microSD Socket 1
FRAM -- 2 kByte
10M/100M Ethernet 1
Wireless -- Wireless 802.11b/g/n + Bluetooth 4.0+EDR w/ chip antenna
USB Host (External Access) 1x USB 2.0 Type A
USB Host (Internal Expansion) 1x USB 2.0 Type A
1x USB 2.0 on Daughter Card Header
USB OTG 1x (also overlaps with USB Console)
Relay 1x
Nimbelink Modem or Xbee Radio Socket 1x
LCD/Keypad -- Support for Monochrome 128 x 64 pixel backlit LCD & 4 button keypad (LCD & Keypad purchased separately as a part of TS-ENC820-HMI)
Gyro -- Nine-Axis (Gyro + Accelerometer + Compass) MEMS MotionTracking Device
TS-SILO -- Up to 30 seconds of power hold up in case of sudden power loss to safely shut down
Common Interfaces Battery Backed Real Time Clock, Push Switch, 4x RS-232, 1x TTL UART, 1x RS-485, 2x CAN Bus, I2C, SPI, UART, up to 5x GPIO
Input Power 5VDC to 28VDC (Barrel connector or Screw Terminal), support for optional PoE daughter card.
Operating Temperature -40 °C to 85 °C
Standard Shipping OS Linux Debian Jessie 4.1.15 kernel