We've Moved!

Please update your bookmarks from embeddedarm.com to embeddedts.com. You've already been redirected and may close this modal to continue.

Newer TS-7800-V2 Product Available. The TS-7800-V2 is the new and improved version of this product. Recommended for new designs.

CPU available in limited quantities. Please contact sales to discuss the scope of your project

TS-7800 Front View TS-7800 Front View
TS-7800  Rear View TS-7800 Rear View
TS-7800 Angled View TS-7800 Angled View
TS-7800 with TS-781 Front View TS-7800 with TS-781 Front View
TS-7800 with TS-781 Angled View TS-7800 with TS-781 Angled View
TS-ENC720 Rear View with 1 Ethernet Port TS-ENC720 Rear View with 1 Ethernet Port
TS-ENC720 Front View TS-ENC720 Front View
TS-7800 Front View
TS-7800  Rear View
TS-7800 Angled View
TS-7800 with TS-781 Front View
TS-7800 with TS-781 Angled View
TS-ENC720 Rear View with 1 Ethernet Port
TS-ENC720 Front View

TS-7800

High-End Performance with Embedded Ruggedness

Lifecycle: Fully Developed | Released: August 2007

The TS-7800 is a RoHS compliant Single Board Computer (SBC) based on a Marvell MV88F5182 500MHz Arm9-based CPU

  • High Performance Embedded with 500 MHz Arm9 based CPU
  • Excellent Connectivity with Gigabit Ethernet, Dual SATA, USB, and More
  • Quickly Boot to Applications Using 0.69 Second Linux Fast-Boot
  • Rugged, Industrial Environment Ready with Fanless -20°C to +70°C Range
  • Highly Configurable via Programmable 12K LUT FPGA and PC/104 Bus
$373 (Qty. 1)
No minimum order quantity on standard products.

The TS-7800 features a 12,000 LUT on-board programmable Lattice FPGA. The FPGA provides extra peripherals such as 110 GPIO lines, additional serial ports, dual 4-bit mode high-speed SD Card sockets (full-size and micro SD Cards), and NAND controller.

All the PC/104 pins are connected straight to the FPGA, giving the TS-7800 the flexibility to add external hardware and physical/transceiver layers. The default TS-7800 FPGA load provides a standard PC/104 bus on the 104-pin connectors, maintaining compatibility with our other Arm® based SBCs and wide range of PC/104 peripheral boards. The FPGA on the TS-7800 enables simple, inexpensive customization that requires no physical hardware modifications. Should you need a special configuration or a custom load, contact embeddedTS for FPGA development services.

Backward Compatibility with TS-72xx Boards

The TS-7800 is backward compatible with our TS-72xx computers, providing 3 times more performance and higher-end features with an identical footprint. Most of the headers (DIO, LCD, Power) and connectors (PC/104, USB, Serial, Ethernet) have the same external footprint and board location as the TS-72xx series. This enables easy platform migration, including cabling, enclosures, and external hardware (LCD, keypad, peripherals).

The TS-7800 is the best option for customers in need of higher performance or newer Linux solutions (latest 2.6 kernel). Contact embeddedTS for information on TS-72xx to TS-7800 upgrades.

FPGA Features

  • Connects to CPU via 50MHz local PCI bus
  • Default load uses GPIO pins as a standard PC/104 ISA bus

The TS-7800 uses an improved Linux 2.6 kernel (currently 2.6.21 version) that allows 0.69 second bootup from NAND flash and provides driver support for all on-board hardware. In addition, the 512MB on-board flash enables a full Debian distribution to be installed with a complete embedded development environment. (Sarge-nonEABI and Etch-EABI images available)

The TS-7800 is shipped with Linux kernel 2.6 and the Debian distribution on on-board flash. The default configuration is an embedded system that can run a wide range of server services, desktop-like applications, and development tools.

0.69 Second Linux Fast-Boot

The TS-7800 500MHz Arm9™-based SBC uses a bootup firmware that enables a Linux 2.6.21 bootup time of 0.69 seconds from on-board NAND flash. The board boots to a minimal kernel and loads an initial RAM disk which has complete access to full-Debian binaries and libraries. The Debian Sarge filesystem can be installed on either the on-board flash or an SD card (either micro or full-size sockets). Extra OS services and drivers are provided as kernel modules which are loaded right after bootup. In addition, extra initialization LinuxRC scripts are provided to enable straight boot-up to the on-board flash, an SD card, or an NFS root filesystem.

After 0.69 seconds, the user has access to a Linux shell prompt and to a Busybox filesystem which enables network services and driver access to most of the TS-7800 hardware. The initialization process is completed in the background (in under 2 seconds). Then the user can take advantage of a complete C/C++ GNU embedded development environment provided by Debian. Alternatively, the user can maximize performance for his embedded application by loading his own Linux application instead of the default /linuxrc script.

The TS-7800 is a fanless, low-power, and rugged Single Board Computer. Therefore, the ultra-fast bootup to Linux can be used in combination with the 200microAmp sleep mode provided by the on-board AVR as an efficient solution for embedded applications which have to periodically wake-up to perform a given task and go back to sleep right after, using little power and with quick feedback.

Bootloader Un-brickable Design

The TS-7800 bootstrap combines FPGA hardware logic, specific boot-up firmware, and kernel tweaks to ensure fast boot time, security, and high board recoverability:

  • Linux-based bootloader boots Linux 2.6 kernel to shell prompt in less than 2 seconds from SD card or on-board flash. A Linux bootload utility is available to boot any other kernel or Operating System image from Linux shell prompt.
  • Un-brickable design ensures 100% recoverability from SD card in case of on-board flash erasure.
  • Full Debian Linux can be installed on on-board flash from a USB flash dongle, eliminating the need to use miniaturized niche embedded Linux distributions or blast/boot boards.
  • SD card security features can be utilized for boot medium verification or booting of locked SD cards.

The TS-7800 is also compatible with other Bootloaders, Linux distributions or Operating Systems. Contact us for further software support regarding the TS-7800.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Arm and Arm9 are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

embeddedTS provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, and our official documentation.

Documentation
Certification
Software Download
News Article
Featured On
From the Blog:
Product Notices:
Subscribe to the Product Communication System (TS-PCS) for TS-7800 Notices
CPU
Architecture Arm
Part Number MV88F5182
Vendor Marvell
CPU Speed 500 MHz
CPU Cores (Max) 1x
Core Specs
Base Memory Capacity 128 MB
FPGA 12 k LUT
Watchdog Timer 1x
Storage
Base Flash Capacity 512 MB
Flash Type NAND
microSD Card Socket 1x
Full Sized SD Card Socket 1x
SATA Ports 2x
Other
Battery-Backed Real Time Clock 1x
Sensors
Temperature Sensor 1x
General I/O
General-Purpose Input/Output (GPIO) Pins 110x
Analog to Digital Ports (ADC) 5x
Serial Interfaces
RS-232 Ports 4x
RS-485 Ports 2x
TTL-Level UART Ports 4x
Peripheral Interfaces
USB Host Ports 2x
PC/104 Ports 1x
Networking
Gigabit Ethernet Ports 1x
Physical
Operating Supply Voltage 5 VDC
Maximum Power Consumption 2.00 W
Fanless Temperature Range -20 °C to 70 °C
Width 119.0 mm
Length 96.5 mm
Software
Linux Kernel Version 2.6
Debian Linux Sarge (3.1)
Busybox Small Distribution Yes
Graphics / HMI
Matrix Keypad Header 1x
Text LCD Header 1x
Quantities
Product Configurations 1 10 50 100
TS-7800-ROHS2REACH $373 $360 $360 $360
TS-7800-ROHS2REACH-RTC $404 $391 Call Us Call Us
TS-7800-ROHS2REACH-SWREG $408 $395 Call Us Call Us
TS-7800-ROHS2REACH-RTC-SWREG $439 $426 Call Us Call Us
TS-ENC720-7260 Thumbnail
TS-ENC720-7260
In Enclosures

Metal enclosure with power converter included


Product Configuration
Part Description Price
TS-7800-ROHS2REACH RoHS2/REACH compliant equivalent of TS-7800-128-512F-FD-TMP, Full Duplex RS-485, Temperature Sensor Pricing
TS-7800-ROHS2REACH-RTC RoHS2/REACH compliant equivalent of TS-7800-128-512F-FD-RTC-TMP, Full Duplex RS-485, Real Time Clock, Temperature Sensor Pricing
TS-7800-ROHS2REACH-SWREG RoHS2/REACH compliant equivalent of TS-7800-128-512F-FD-TMP, Full Duplex RS-485, Temperature Sensor, 8-30VDC on-board switching-mode power regulator Pricing
TS-7800-ROHS2REACH-RTC-SWREG RoHS2/REACH compliant equivalent of TS-7800-128-512F-FD-RTC-TMP, Full Duplex RS-485, Real Time Clock, Temperature Sensor, 8-30VDC on-board switching-mode power regulator Pricing
TS-7800-128-512F-FD TS-7800 500MHz ARM9 SBC with 128 MB DDR-RAM and 512 MB Flash with Full Duplex RS-485 Limited
TS-7800-128-512F-ST104-RTC-TMP TS-7800 500MHz ARM9 SBC with 128 MB DDR-RAM and 512 MB Flash with 16-bit 104-pin Stack-Thru PC/104 Connector, Real Time Clock, and Temperature Sensor Limited
Flash Media
Part Description Price
SD-16GB-7800 TS-7800 bootable 16GB SD card pre-installed with Debian Linux for Arm and full tool chain $38
SD-16GB-USB-7800 TS-7800 bootable 16GB SD card with USB reader interface including recovery mechanism, out-of-the-box ECLIPSE IDE with debugging, Arm tool chain, Debian filesystem, documentation and further binaries/utilities $86
SD-16GB-BLANK 16GB Blank SD Card $19
SD-16GB-USB-7300 TS-7300 bootable 16GB SD with USB reader interface, card pre-installed with Debian Linux for Arm and full tool chain (supports TS-7260, TS-7300, TS-7400) $86
SD-16GB-7300 TS-7300 bootable 16GB SD card pre-installed with Debian Linux for Arm and full tool chain (supports TS-7260, TS-7300, TS-7400) $38
Accessories and Extras
Part Description Price
RC-106.5 10 Pin Female Ribbon Cable, approx 6 inches $5
RC-1408 14 Pin Female Ribbon Cable, approx 8 inches $5
CB-JUMPER-10-F-F-6 Quantity 10 female-to-female 6-inch red jumper wires for use with 0.1” headers $7
CB-JUMPER-10-M-M-6 Quantity 10 male-to-male 6-inch blue jumper wires for use with 0.1" headers $7
RC-DB9 10-pin header COM port adapter cable to DB-9 $5
KPAD Matrix keypad with cable $35
KPAD-LCD Faceplate with LED backlit LCD / Keypad for TS-7xxx Series SBC $160
CB7-05 Null modem cable with a DB9F at each end $10
LCD-LED Alphanumeric 2x24 LCD with backlight and cable $50
Power Supplies
Part Description Price
PS-12VDC-REG-2P2 Regulated 12 VDC, 2.5 A wall mounted power supply with 2 pin black screw terminal connector (100-240 VAC, 50-60 Hz, A-type Plug) $21
PS-5VDC-REG-2P1 Regulated 5 VDC, 2.5 A wall mounted power supply with 2 pin black screw terminal connector (100-240 VAC, 50-60 Hz, A-type Plug) $26
Enclosures
Part Description Price
TS-ENC720-7260 Metal enclosure with power converter included $113

CA Prop 65 Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov