The TS-7670 is a small Arm®-based SBC that is designed to provide extreme performance for applications which demand high reliability, fast bootup/startup, and connectivity at low cost and low power, such as fleet vehicle or asset tracking, point-of-sales (PoS), vending machines, data acquisition units, data recorder modules, etc. Additional TS-7670 specifications include:
- Full Industrial temperature range
- 2 GB soldered down eMMC SLC Flash
- Data redundancy via dual removable SD cards
- Temperature compensated RTC with less than ±5 ppm clock drift
- CPU speed can be adjusted on the fly between 454 MHz to 261 MHz
- 1x USB serial device for console
- Multi-constellation GPS Radio
- Low Power Sleep Mode (< 10 mW)
- 0.60 W Idle, 1.30 W Load
- 8--28 VDC Power Supply Input
- -40 °C to 85 °C Industrial Temps
The TS-7670 ships with Linux kernel version 4.9 and Debian Wheezy preinstalled. Linux 5.10 kernel is available, as well as newer Debian distributions and Buildroot support. Other software features include:
- Sleep mode requiring around 10 mW of power, with the ability to wake up after an arbitrary timeout with a 1 s resolution or at the press of the reset button
- Standby mode which consumes 180 mW, and can wake and resume execution in as little as 250 ms
- Boot time from power on to BusyBox shell is 4.5 s from SD card and 5.8 s from flash storage
| CPU |
| Architecture |
Arm |
| Part Number |
i.MX286 |
| Vendor |
NXP |
| CPU Speed |
454 MHz |
| CPU Cores (Max) |
1x |
| Core Specs |
| Base Memory Capacity |
128 MB |
| Maximum Memory Capacity |
256 MB |
| Watchdog Timer |
1x |
| Storage |
| Base Flash Capacity |
2 GB |
| Flash Type |
eMMC |
| microSD Card Socket |
2x |
| Other |
| Battery-Backed Real Time Clock |
1x |
| Sensors |
| Temperature Sensor |
1x |
| General I/O |
| General-Purpose Input/Output (GPIO) Pins |
4x |
| Serial Interfaces |
| RS-232 Ports |
2x |
| RS-485 Ports |
1x |
| Peripheral Interfaces |
| USB Host Ports |
1x |
| Industrial Protocols |
| CAN Ports |
2x |
| Networking |
| 10/100 Ethernet Ports |
1x |
| Physical |
| Operating Supply Voltage |
8 VDC to 28 VDC |
| Minimum Power Consumption |
0.60 W |
| Maximum Power Consumption |
1.30 W |
| Fanless Temperature Range |
-40 °C to 85 °C |
| Width |
102.0 mm |
| Length |
128.3 mm |
| Radio Comms |
| GPS Radio |
Yes |
| Cellular Modem |
Yes |
| Software |
| Linux Kernel Version |
5.10 |
| Debian Linux |
Wheezy (7.0) |
| RAID-Like DoubleStore™ Storage |
Yes |
TS-7670 Block Diagram
(Download PDF version)
| Product Configuration |
| Part |
Description |
Price |
| TS-7670-256-2048F-2CAN-I |
TS-7670 industrial grade (-40C to 85C) SBC with a NXP i.MX28 454MHz Arm9 core, 256MB of DDR2 RAM, 2GB of onboard eMMC flash, and second CAN port
|
Pricing
|
| TS-7670-128-2048F-I |
TS-7670 industrial grade (-40C to 85C) SBC with a NXP i.MX28 454MHz Arm9 core, 128MB of DDR2 RAM, and 2GB of onboard eMMC flash
|
Pricing
|
| TS-7670-256-2048F-I-DEV |
TS-7670 industrial grade (-40C to 85C) SBC with a NXP i.MX28 454MHz Arm9 core, 256MB of DDR2 RAM, 2GB of onboard eMMC flash, second CAN port and GPS radio module (recommended for development)
|
Pricing
|
| Board Specific Peripherals |
| Part |
Description |
Price |
| TS-DC767-MT |
Daughter card for modem modules (modem not included)
|
$37
|
| TS-DC767-POE |
Daughter card with Power-over-Ethernet
|
$62
|
| Flash Media |
| Part |
Description |
Price |
| MSD-4GB-BLANK |
SanDisk microSD card, Size 4GB
|
$15
|
| MSD-4GB-USB-7400-V2 |
Bootable 4GB microSD card with Arm tool chain, Debian Linux filesystem, and further binaries/utilities, including a USB adapter (compatible with TS-7400-V2, TS-7670)
|
$48
|
| MSD-4GB-7400-V2 |
Bootable 4GB microSD card with Arm tool chain, Debian Linux filesystem, and further binaries/utilities (compatible with TS-7400-V2, TS-7670)
|
$15
|
| Accessories and Extras |
| Part |
Description |
Price |
| CB-JUMPER-10-F-F-6 |
Quantity 10 female-to-female 6-inch red jumper wires for use with 0.1" headers
|
$7
|
| CB-USB-AMBM |
USB Cable w/ connectors USB-A Male to USB-B Male
|
$9
|
| CB-ANT-GPS |
5 meter SMA GPS Antenna
|
$33
|
| Power Supplies |
| Part |
Description |
Price |
| PS-MDR-20-24 |
24W Single Output Industrial DIN Rail Power Supply
|
$39
|
| PS-12VDC-REG-2PG |
Regulated 12 VDC, 2.5 A wall mounted power supply with 2 pin plug connector (100-240 VAC, 50-60 Hz, A-type Plug)
|
$27
|
| DIN Enclosures |
| Part |
Description |
Price |
| TS-ENC767-DIN |
Low cost plastic enclosure for the TS-7670 with a DIN mount
|
$41
|
| Enclosures |
| Part |
Description |
Price |
| TS-ENC767 |
Low cost plastic enclosure for the TS-7670
|
$34
|
| Development Kits |
| Part |
Description |
Price |
| KIT-7670 |
Development kit includes: PS-12VDC-REG-2PBF5 power supply; CB-USB-AMBM console cable; MSD-4GB-USB-7400-V2 removable boot media; and jumpers, jumper wires and other hardware
|
$91
|
Notes
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
