We've Moved!
Please update your bookmarks from embeddedarm.com to embeddedts.com. You've already been redirected and may close this modal to continue.
Not Recommended for New Designs. This product is not recommended for new designs. Please contact us to discuss newer product alternatives.
TS-9600
IDE Interface PC/104 Peripheral
Lifecycle: Legacy | Released: September 2002The TS-9600 is a PC compatible IDE interface board (PC/104 form-factor) that mates via the PC104 connector to a Single Board Computer (SBC).
- Connect an IDE Hard Drive to an SBC
- Boot from IDE Hard Drive
- Selectable IDE and IRQ Address
$132 (Qty. 100) $132 (Qty. 1)
No minimum order quantity on standard products.
The TS-9600 allows the use of a 2.5" IDE drive (laptop sized hard drives) or a desktop sized IDE drive on a Single Board Computer. It even allows an SBC to be booted from a hard drive!
The DIP switch controls the IDE address and IRQ used. The TS-9600 supports Master and Slave hard drives using the same cable. Power requirement is +5 vdc @ 40 mA and standard temperature operation range is 0 to 70C. There are on-board mounting holes which allows mounting of 2.5 laptop hard drive directly onto TS-9600.
The TS-9600 is compatible with most embeddedTS SBCs, including the TS-7200, TS-7250 and TS-7260. The 16-bit PC/104 expansion bus option is required for each of these SBCs for it to work with the TS-9600.
For further information about this product, please contact embeddedTS or refer to the product's manual.
All versions of DOS we have tested don't require interrupts. Our TS-Linux 3.0 kernel does require an interrupt. The TS-9600 IDE interface is usually mapped as DOS drive C: or /dev/hda in Linux and can be mapped as DOS drive D: or /dev/hdc in Linux using Dip Switch 4. The TS-9600 supports Master and Slave hard drives using the same cable.
For further information about this product, please contact embeddedTS or refer to the product's manual.
Detailed Feature List
- IDE Interface
- Dip-switch selectable IDE IRQ
- Dip-switch selectable Primary or Secondary IDE device
- Drive Activity LED
- Jumper selectable master/slave function
- 2.5 Hard Drives available
embeddedTS provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, and our official documentation.
Documentation
From the Blog:
Product Notices:
| Physical | |
|---|---|
| Fanless Temperature Range | -20 ° to 70 °C |
| Quantities | ||
|---|---|---|
| Product Configurations | 1 | 100 |
| TS-9600 | $132 | $132 |
| Product Configuration | ||
|---|---|---|
| Part | Description | Price |
| TS-9600 | IDE interface peripheral board | Pricing |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov